The PaxScan® 1313 incorporates all of our latest high-speed electronics used in our real-time images, but in a smaller format suitable for applications using 6 inch image intensifiers. Interfacing to this new panel is a simple task through the industry standard CameraLink port.

The high resolution receptor combined with a software-based command processor capable of 30 frames per second makes this an ideal imager for microfocus X-ray applications. Computer tomography (CT) applications also benefit from the high dynamic range and uniform image quality across a wide X-ray range.

The PaxScan® 2020+ has been specifically designed to meet or exceed the unique imaging requirements for next generation cardio-vascular diagnostic imaging equipment and mobile C-arms. The high sensitivity of the CsI scintillator combined with proprietary noise management techniques allows for excellent low-dose imaging performance that surpasses image intensifier tube (IIT) devices. Other features include an optimal 2 cm border between the active matrix and the edge of the receptor, further optimization of the pixel architecture, and an improved Command Processor with extended mode memory and faster clock speed.

The PaxScan® 2520E+ is a ruggedized portable X-ray imaging component designed for high-speed fluoroscopic and radiographic digital X-ray imaging in the field. The light weight magnesim housing is shock-resistant.

The imaging system has two main components: the Receptor which houses the solid-state, flat panel sensor and the I/O Interface Box that provides interface to the hand switch and the X-ray generator connector. The I/O Interface Box also includes a small compartment for a rechargeable battery.

PaxScan® 2520D is a third-generation X-ray imager designed for high-speed dental cone-beam CT imaging. Based upon the new Gigabit Ethernet interface standard, or customer-specified CameraLink standard, images are displayed instantaneously on a user-supplied workstation. The housing is lightweight aluminum.

The PaxScan® 3030+ is our dedicated field-of-view (FOV) real-time flat panel detector (FPD) for diagnostic systems specializing in lower G.I. studies. The main system components are the 30 x 30cm 194µm-pixel amorphous silicon FPD, real-time image processor (Command Processor), and universal dual-output power supply. Excellent low-dose performance is achieved by combining Varian's proprietary readout electronics with the high sensitivity of a custom Cesium Iodide scintillator. This FPD makes an ideal replacement for 12" I.I. tubes, particularly for remote R&F table-based.

The PaxScan® 4030CB is specifically designed to meet the needs of Cone Beam X-ray imaging applications featuring multiple sensitivity ranges and extended dynamic range modes.  The main System components are the 40 x 30cm 194µm-pixel amorphous silicon FPD, real-time image processor (Command Processor), and universal dual-output power supply.  Excellent low-dose performance is achieved by combining Varian's proprietary readout electronics with the high sensitivity of a customer Cesium Iodide scintillator.

The PaxScan 4030E is an advanced 40 x 30 cm (16 x 12 inch) digital imaging subsystem, incorporating a flat panel amorphous silicon sensor array, power supply and all interconnecting cables. Based upon the new Gigabit Ethernet interface, images are displayed instantaneously on a user-supplied PC running Varian ViVA™ software included.

The PaxScan 4336R is a 43cm x 36cm detector is the first portable X-ray flat panel detector designed to replace standard film cassettes used in exiting radiographic applications. It is intended for use in mobile systems and fits into existing 14' x 17' bucky imaging systems. The 4336R has an active area of 3052 x 2540 pixels.

The PaxScan 4336R is also available with an optional portable enclosure designed for mobile digital radiographic X-ray systems.

The PaxScan 4343R is a 43cm x 43cm detector, Varian's largest panel. It is designed for permanent mounting in radiographic tables or wall stands. The large size of the 4343R makes it an excellent receptor for real-time, large field of view image aquisition, such as chest X-rays. The 4343R has an active area of 3052 x 3052 pixels.

Note: Unless otherwise indicated, Varian imagers are not sold for use as medical devices. Certain system integrators may have obtained FDA clearance for their integrated devices. Obtaining such clearances is the responsibility of the system manufacturer or integrator.

Contact Us for Additional PaxScan Product Data
To get more details on the PaxScan products, please contact your Varian Flat Panel Representative. Click on X-ray Contacts or email vipinfo@varian.com